EN-24
Dynamic Lighting Feature
This feature compensates for the unfavorable lighting conditions by brightening
underexposed areas and balancing overexposed areas.
1. Press the [ ] button.
2. Select the image that you want to edit with the
e
/
f
buttons.
3. Press the button.
4. Select [Dynam. Light.] with the c / d buttons,
and press the button.
5. Select [Execute] with the c / d buttons, and
press the button.
6. View the changes on the corrected image.
7. To save your corrected image, select [Confirm]
with the c / d buttons, and press the button.
When this process ends, this replaces the original image with the corrected
image.
Attaching Voice Memos
A maximum of 30 seconds of audio can be recorded as a memo for captured still
images. The voice memo can be recorded only once.
1. Press the [ ] button.
The last image appears on the screen.
2. Select the image to which you want to attach the voice memo with the e / f
buttons.
3. Press the button.
4. Select [Voice Memo] with the c / d buttons, and press the button.
5. Select [On] with the c / d buttons, and press the button.
6. Press the button to exit from the menu.
7. Press the shutter button.
[VOICE RECORDING] is displayed on the screen and the recording starts.
8. To stop recording a voice memo as it is being recorded, press the shutter button
again.
[VOICE RECORD END] will be displayed and the recording will end. An [] icon
is displayed with images that have been recorded with a voice memo.
Playing back voice memo
Pressing the shutter button with an image that has a VOICE MEMO recorded starts the
VOICE MEMO playback.
Voice memo is only available for still images.
0