EasyManuals Logo
Home>Polaroid>Digital Camera>T1032

Polaroid T1032 User Manual

Polaroid T1032
41 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
EN-40
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Select the image that you want to print with
the e / f buttons.
Select the [Print Num] (up to 99) with the
c / d
buttons.
After selecting the desired image and printing
number, press the button to confirm.
4. Select [Exit] with the c / d buttons, and press
the button.
5. Select [Print] with the c / d buttons, and press
the button to start printing.
6. The printing starts and the figure shown on the
right hand side appears.
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
If an error is detected during the connection (i.e.
the printer hardware problem) between camera
and printer, [PRINT ERROR] will be displayed.
If an error is detected during the
communication
(i.e. wrong setting on the camera) between
camera and printer, [ERROR] will be displayed.
The image printing may fail if the power to the camera is cut off.
For service, support and warranty information visit www.polaroid.com.
"Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, USA.
!
PRINTING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaroid T1032 and is the answer not in the manual?

Polaroid T1032 Specifications

General IconGeneral
BrandPolaroid
ModelT1032
CategoryDigital Camera
LanguageEnglish

Related product manuals