20
Reset RRT
Clear all rating settings.
Using the CHANNEL Menu
Press【MENU】, then use【Left】/【Right】buttons to select the CHANNEL menu in TV mode.
Analog TV signal Digital TV signal
Antenna
Switch the TV input mode between cable and air.
Auto Scan
Select the Auto Scan and press【Right】to search the NTSC and ATSC TV channels
automatically. During the search, the channels are stored.
When antenna set to AIR, select Start to Scan, when the search is finished, the TV will
automatically return to the first channel found.
When antenna is set to CABLE, there are four cable selections for the OSD. Select one mode
and Start to Scan.
Channel Show/Hide
1. Press the 【Menu】 button. Using the 【Left】or 【Right】arrows select CHANNEL. Press
the
【Down】arrow to highlight CHANNEL SHOW/HIDE and press the【Right】arrow.
To Next Page
Loading...
Need help?
General