Polaroid XSA-00770S

Set Up and Navigation
Control Button Functions - continued
OSD Functions
Note: To enter the OSD, hold the EXIT button down for one second.
To exit, simply press the EXIT button.
Note: The OK button has two functions:
1:Press it just for a second to confi rm your choice
2: Press and hold it down for a longer time to enter the slide show mode.
Button Command
<< Up
► / II Select
>> Down
EXIT Exit OSD Menu
Viewing Pictures Individually
Button Command
<< Previous Picture
► / II Zoom in the Select Picture
>> Next Picture
EXIT Press once to zoom out the picture to original size or hold down for one second to enter OSD Menu
Select Mode Page / Select Card Page
Button Command
<< Left
► / II Select
>> Right
EXIT Back to “Select Card” Page
Demo Slide Show
Some demo pictures have been loaded into the digital picture frame. These pictures can be viewed without inserting any
memory cards. Power on the digital picture frame, wait for a while, the demo slide show will run automatically.
Controls and Basic Instructions
Connecting a USB Device to the Digital Picture Frame
Your Digital Picture Frame has a built-in USB port. Using a USB cable (not included) and your digital camera or a USB
fl ash drive, you have the ability to view images directly from the USB source.
1. Connect the AC adapter to the Digital Picture Frame and slide the power switch to the “on” position.
2. Connect one end of a USB cord to a USB device such as a digital camera or USB fl ash drive, and the other end to
the Digital Frame.
3. Once the Digital Photo Frame has recognized the USB source, you will be able to view all the pictures on the
camera’s internal memory, its memory card, or a USB fl ash drive.