Polarstart PS-4660 TW User Manual

MANUAL TRANSMISSION REMOTE STARTER
PS-4660 TW
Installation Guide
Notice
The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of
the product, be that either damage to the vehicle itself or to the unit. This unit must be installed by a certified
technician using all safety devices supplied. Please note that this guide has been written for properly trained
Autostart technicians: a certain level of skills and knowledge is therefore assumed. Please review the
installation guide carefully before beginning any work.
Warning
This remote car starter system is designed for vehicles with a manual transmission only. Before
installing the unit, test that the OEM door switch contacts of the vehicle work well, and that the parking brake
system operates properly.
DOC:1.00 September 9, 2004 CA Manufactured in Canada
PS-4660TW Installation Guide P. 1

Polarstart PS-4660 TW Specifications

General

Brand	Polarstart
Model	PS-4660 TW
Category	Remote Starter
Language	English

Summary

Introduction

Included in the Kit

Lists the components included in the remote car starter kit.

Installation Essentials

Installation Points to Remember

Key considerations and precautions for a proper installation.

The Programming Assistance Button

Details the function and use of the on-module programming assistance button.

Wiring Harnesses

6-Pin Main Ignition Harness

Describes the wires, colors, functions, and connections for the main ignition harness.

5-Pin Secondary Harness

Describes the wires, colors, functions, and connections for the secondary harness.

12-Pin Accessories Harness

Describes the wires, colors, functions, and connections for the accessories harness.

2-Pin Harness

Describes the wires, colors, functions, and connections for the 2-pin harness.

System Programming

Flashing the Hood-Pin Switch

Procedure to enter programming mode via the hood pin switch.

Programming a Transmitter

Step-by-step guide to program remote transmitters to the system.

Entering Programming Options Mode

Methods to access the system's programming center.

Programming Options Overview

Detailed breakdown of configurable modes and functions for system customization.

Horn Honk Timing

Procedure to adjust the duration of horn confirmation signals.

Tachometer Programming and Adjustments

Tach Programming Basics

Essential steps for programming tachometer signals for proper engine starting.

Multi-speed Tach Programming

Method for programming tachometer signals for varying vehicle systems.

Automatic Tach Programming

A simpler alternative procedure for tachometer programming.

Tach Adjustments

How to fine-tune engine idle speed after tach programming.

Vehicle Operation and Testing

Testing Procedures

Verifying system operation and installation correctness before final assembly.

Ready Mode Management

Conditions that maintain or cancel the vehicle's Ready Mode status.

Closing Up

Final steps for securing components and completing the installation.

Advanced Features and Troubleshooting

Supplementary Information

Additional details on specific features and system capabilities.

Fifth Relay Output Configuration

Explains how to configure the 5th relay for second ignition, accessory, or crank functions.

Clutch Bypass Procedures

Detailed methods for bypassing clutch safety switches in manual transmission vehicles.

Ignition-controlled Door Locks

Feature to automatically lock/unlock doors based on ignition and brake pedal status.

Secure Lock Features

Options for controlling OEM alarms via lock/unlock signals.

Starter Kill Installation and Arming

How to install and configure the starter kill feature for anti-theft.

Resetting the Remote Car Starter

Methods for resetting the system to factory defaults and clearing codes.

Events Logging and Playback

How to access and interpret logged start failure events.

Diagnostics - Parking Light Flash Table

A table mapping parking light flash patterns to diagnostic codes and system states.

Wiring Schematic

WIRING SCHEMATIC

A visual diagram illustrating all module connections and component layout.