Polder KSC-310-28 User Manual

EASY-READ DIGITAL KITCHEN SCALE
ITEM#: KSC-310-28
USE & CARE INSTRUCTIONS
IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY.
For assistance with use, parts and customer service call (800) 431.2133 Monday through Friday, 9AM to 5PM EST,
email info@polder.com or visit our website at www.polder.com.
Customers in the UK can call +44 (0) 1243 780501 or visit www.polderproducts.co.uk
IMPORTANT INFORMATION:
If this is your first me using the Easy-Read Digital Kitchen Scale please be sure to remove the protecve insulaon tape from the baery compartment and protecve sheet
from the weighing plaorm before use.
LOW BATTERY INDICATOR
1. If the baery symbol appears on the display, it is recommended to replace with new baeries to ensure opmum accuracy of the scale.
2. If the display shows ‘Lo’ and shuts off automacally, please replace the baeries immediately.
TO INSTALL / CHANGE BATTERIES
Warning: baeries may pose a choking hazard. Do not let children handle baeries.
This item uses four AAA baeries. In order to ensure proper performance, be sure to replace baeries as a simultaneous set. Baeries should be removed from the scale if
consumed or if the product is to be le unused for a duraon of me. It is recommended to clean all baery contacts prior to installaon. Do not mix old and new baeries.
Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) baeries.
Always purchase the correct size and grade of baery most suitable for the intended use.
Replace all baeries of a set at the same me.
Ensure all baeries are installed correctly with regard to polarity (+ and -).
Remove used baeries promptly.
1. Baery door is located on the back of the unit.
2. Press and pull open the baery cover.
3. Insert four AAA size baeries as shown:
4. Replace baery door, pushing down unl it snaps in place.
DISPOSAL OF USED BATTERIES
Baeries may contain hazardous substances which could endanger the environment and human health.
This symbol marked on the baery and/or packaging indicates that used baery shall not be treated as municipal waste. Instead it shall be le at the appropriate
collecon point for recycling. By ensuring the used baeries are disposed of correctly, you will help prevent potenal negave consequences for the environment and
human health. The recycling of materials will help conserve natural resources.
For more informaon about collecon and recycling of used baeries, please contact your local municipality, your waste disposal service or the point of sale where you
purchased this product.
TO TURN THE SCALE ON/OFF:
Place item on a flat surface before use.
1. Press the (ON/OFF) buon to turn scale ON. “HI” will display and aer a few seconds a “0” (for g) or “ 0.0” (for lb & oz) will appear.
The scale is ready to use.
2. Press the (ON/OFF) buon to turn scale OFF.
NOTE: The backlit display will turn off aer 30-seconds without use, however the scale is sll on and funconing. Tap the weighing surface to re-illuminate display. The
auto shut-off feature will turn the scale off if not used for 3 minutes.
TO SWITCH BETWEEN lb AND g:
HOW TO USE TARE (addive weighing) FEATURE:
When using the TARE funcon, starng weight should not exceed 2.10 lb. / 950 g.
1. Place first item on scale, scale will display weight of item.
2. Press (TARE) buon. Display will revert to “0” (for g) or “0:0.0” (for lb. and oz.).
3. Place second item on scale, scale will display weight of item.
4. Press (TARE) buon. Display will revert to “0” (for g) or “0:0.0” (for lb. and oz.).
5. Repeat steps 3 and 4 unl all items have been weighed.
NOTE: there are two ways to set the scale at “0” when weighing items in a container.
1. Place the container on the scale before turning it ON.
2. If the scale is already ON, place the container on the scale and press the (TARE) buon which will revert the scale to “0” (for g) or “0:0.0” (for lb. and oz.).
NOTE: the scale will read “O-Ld” if weight on scale is above the scale‘s capacity of 11.0 lb. / 5,000 g.
ON
OFF
x2
With the scale off, turn on the scale and immediately tap the (ON/OFF) buon again while the display reads “HI”. It’s important to note that this is a gentle double
tap to switch between pounds and grams. No need to press. If there is too much of a delay between turning the scale on and tapping again, the scale will not
switch between reading modes. Turn the scale off and try again.
CAPACITY: 11.0 lb. / 5,000 g. (displays in 0.1 oz. / 1.00 gram increments).

Polder KSC-310-28 Specifications

General

Type	Digital Kitchen Scale
Capacity	11 lb / 5 kg
Increments	0.1 oz / 1 g
Display	LCD
Power Source	2 x AAA batteries
Auto Shut-off	Yes
Tare Function	Yes
Power	Battery
Unit Conversion	Yes
Material	Stainless Steel

Summary

Low Battery Indicator

Battery Symbol

If the battery symbol appears, replace with new batteries for optimum accuracy.

Low Battery Warning

If display shows 'Lo' and shuts off, replace batteries immediately.

Install and Change Batteries

Battery Requirements

Uses four AAA batteries. Replace simultaneously, clean contacts, do not mix types or polarity.

Battery Installation Steps

Locate battery door, open cover, insert four AAA batteries correctly, and replace door.

Disposal of Used Batteries

Environmental Disposal

Batteries contain hazardous substances; do not treat as municipal waste. Recycle properly.

Turning the Scale On and Off

Powering On

Place on flat surface, press (ON/OFF). Display shows 'HI' then '0' or '0.0'.

Powering Off and Auto Shut-off

Press (ON/OFF) to turn off. Display off after 30s, auto shut-off after 3 minutes.

Switching Units

Lb and Grams Conversion

With scale off, turn on and immediately double tap (ON/OFF) to switch between lbs and grams.

Tare Feature

Additive Weighing

Use TARE button to zero scale after adding items for cumulative weight.

Tare with Container

Place container on scale before turning on, or press TARE after placing container.