If search results in error, check whether the instrument is properly connected to PC. For
M1610, РМ1605 or РМ1904А disconnect the cable for the instrument’s USB port,
reconnect it again and repeat several times if required so that instrument’s LCD displays
“USB”. For PM1603/04, PM1621, РМ1208М, РМ1703MO-1BT check that IR link
between instrument and adapter is engaged.
Successful search displays the following information on the found instrument:
Instrument serial number;
Firmware version;
Instrument’s manufactured date.
Press Proceed with This Instrument button and software opens Instrument Settings
window.
____________________________________________________________________________________
© 2016 Software Guide www.polimaster.com
115
To Next Page
Loading...
Need help?
General