For PM1603/04, PM1621, РМ1208М, РМ1703MO-1BT instruments:
Serial number – instrument’s serial number;
Firmware version – microprocessor software version;
Manufactured date – manufacture date of the instrument;
Measurement Units – select instrument measurement units by flagging
corresponding radio-button;
Write Dose – flag this window to enable DE recording;
Write Dose Rate – flag this window to enable DER recording;
History Record Type – flag required radio-button to enable linear or cyclic way of
history recording;
History Step – use arrow buttons to set required history recording interval;
Dose Rate Alarm Sound – flag this check box to enable turning on audio alarm when
any set DER threshold is exceeded;
Dose Alarm Sound – flag this check box to enable turning on audio alarm when any set
DE threshold is exceeded;
I and II Dose Rate (DER) Threshold, mSv/h – use arrow buttons to set required
value of the First and Second DER thresholds in mSv/h (mRem/h). Thresholds
____________________________________________________________________________________
© 2016 Software Guide www.polimaster.com
119
To Next Page
Loading...
Need help?
General
