4. Pull out the crown in Pos. “c”,
when the second hand aligns 12 hours
marker. The second hand stops.
5. Turning the crown counterclock-
wise, (hour, 24-hours and minute
hands move clockwise) turn hands
until the calendar hand aligns the cur-
rent date, the current day appears in
the window, the current moon phase
is set. Continuing turning the crown
set hands to the desired time.
6. Return the crown in Pos. “a”. If you
want to set exact time, fullfill this pro-
cedure with time signal.
TIME/CALENDAR SETTING
16
ATTENTION!
It is necessary to correct the date and
the month manually by fast correction
(by turning the crown in Pos. “b”) at
the end of February and all short (30
days) months
Notes:
When setting the hour hand, check by
the position of 24-hour hand that
AM/PM is correctly set. The watch is
so designed that the date changes
once in 24 hours.
To Next Page
Loading...