Need help?Do you have a question about the Polk Mono Atrium SUB100 and is the answer not in the manual?
General| Driver Size | 10 inches |
|---|---|
| Enclosure Type | Sealed |
| Impedance | 8 Ohms |
| Weather Resistance | Yes |
| Type | Subwoofer |
| Amplifier Power | 100 Watts RMS |
Essential precautions for safe installation and operation of the product.
Guidance on cleaning, accessories, power, lightning, servicing, and parts.
Explanation of recommended amplification ranges for Polk Audio speakers.
How to avoid damaging speakers by managing amplifier output and distortion.
List of items included in the SAT300 satellite speaker box.
List of items included in the SUB100 subwoofer box.
Instructions and materials needed for painting the SAT300 speaker.
Steps for painting the cabinet, clamp, bracket, knob, and grille.
Instructions and materials required for painting the SUB100 subwoofer.
Steps for applying primer and finish color to the subwoofer cabinet.
List of hardware and diagrams for SAT300 ground mounting.
Specification and illustration for the ground mounting depth.
Detailed instructions for installing the SAT300 speaker using the ground mount.
Guidance for mounting the SAT300 in the ground without the security plate.
Instructions on how to aim the SAT300 speaker after mounting.
List of hardware and diagrams for SAT300 pendant mounting.
Steps for securing the pendant cable and running speaker wire.
Procedure for exposing and connecting speaker terminals for pendant mount.
Final steps for attaching the pendant cap and securing the mount.
Hardware and steps for mounting the SAT300 speaker using a bracket.
How to use the template to mark and drill holes for bracket mounting.
Caution regarding speaker aiming angle to prevent water damage.
Steps for mounting the SUB100 subwoofer on a deck using keyhole slots.
Recommendations for placing the SUB100 subwoofer in a garden.
Information about the built-in security eyebolt for anchoring the SUB100.
Guide for connecting two SAT300 speakers per stereo channel to an amplifier.
Diagrams illustrating typical hookup configurations for SAT300 and SUB100.
Detailed wiring instructions for connecting speakers and subwoofer to amplifier outputs.
Importance of correct polarity and connecting left/right channels for SAT300/SUB100.
Recommendation to use silicone sealant with wire nuts for weatherproof connections.
Guidelines for installing more than two SAT300 speakers, including amplifier usage.
Wire gauge recommendations for running SAT300s/SUB100s beyond the provided length.
Details on wire color coding for the SUB100 subwoofer.
Instructions for connecting two SAT300s and one SUB100 to the IPX7 junction box.
Diagram illustrating amplifier to junction box connection for SAT300 and SUB100.
Diagram showing internal wiring within the junction box for SAT300 and SUB100.
Wire gauge recommendations for running SAT300s/SUB100s beyond the provided length.
Details on wire color coding for the SUB100 subwoofer.
Instructions for connecting four SAT300s and one SUB100 to the IPX7 junction box.
Diagram for connecting amplifier to junction box with four SAT300 speakers.
Diagram showing internal junction box wiring for four SAT300 speakers and SUB100.
Details on the 5-year warranty period and transferability of the Polk Audio product.
List of conditions and damages not covered by the Polk Audio warranty.
Information on incidental, consequential damages, and implied warranty limitations.
Specifies where the warranty applies and terms for other countries.
Instructions on how to use the template for mounting the SAT300 speaker.
Guidance for mounting the SAT300 on solid surfaces like walls or posts.
Note on using wall anchors for drywall installations.
To Next Page
