Polsen RC-77-U - Setting Audio Preferences; Windows 7;8 Setup

8
SETTING THE AUDIO PREFERENCES IN YOUR COMPUTER
Windows 7/8
1. Go to the Control Panel and open the Sound window.
2. Click on the Recording tab (Fig. 1) and select Polsen USB Mic. If the Polsen USB Mic
icon appears with a small circle with a downward pointing arrow, right-click on the device
and select Enable from the drop-down menu.
Note: If the RC-77-U microphone does not appear in the Recording window, see the
Troubleshooting section below.
3. Click on the Set Default button and then click on OK to make the RC-77-U as your default
microphone. The microphone should appear with a green check mark next to it.
4. Test the microphone by speaking into it. If the meter next to the microphone registers
your voice with green bars, your microphone is active, and the audio signal is reaching the
computer.