What to do if my POLTI Sani System Business does not dispense steam?
To resolve the issue of no steam dispensing from your POLTI Steam Cleaner, ensure that the boiler has enough water by adding water as described in Section 5. Allow time for the steam indicator light to illuminate, signaling proper pressurization. Verify the steam dispenser is correctly and fully inserted. Also, check that the child safety switch is deactivated.
Why is my POLTI Sani System Business releasing only a little steam?
If your POLTI Steam Cleaner is pressurized but releases only a small amount of steam, adjust the steam adjustment dial to increase the steam output to your desired level.
How to fix a POLTI Sani System Business Steam Cleaner that won't turn on?
If your POLTI Steam Cleaner does not turn on, ensure that it is correctly connected to the power mains, as detailed in Section 1.
What to do if my POLTI Sani System Business isn't using Polti HP-Med?
If the POLTI Steam Cleaner does not consume Polti HP-Med during use, ensure the stopper inside the bottle is correctly inserted, following the instructions in Section 1.
Why do the lights on my POLTI Sani System Business keep flashing?
The “steam ready” indicator light and the steam dispenser light coming on and going off during use of your POLTI Steam Cleaner is normal, and no action is necessary.
What to do if steam does not come out and the cap won’t unscrew on POLTI Sani System Business Steam Cleaner?
Do not attempt to open the cap. Take the device to an Authorised Service Centre.
General| Brand | POLTI |
|---|---|
| Model | Sani System Business |
| Category | Steam Cleaner |
| Language | English |
To Next Page