What to do if my POLTI VAPORELLA FOREVER 850 PRO is on but there is no steam?
If your POLTI Iron is on but not producing steam, the water tank (3) might be empty or not correctly inserted. To fix this, fill the water tank (3).
Why is water coming out of my POLTI Iron instead of steam?
If water is coming out of your POLTI Iron instead of steam, it might be because the appliance hasn't reached the correct temperature yet, or the temperature control dial (7) is set too low. Wait for the “Steam Ready” indicator light (B) and the iron indicator light (11) to turn off, then increase the temperature using the temperature control dial (7).
Details risks of electric shock and short circuits, requiring compliance with laws and proper handling of the appliance and its cable.
Steps to prepare the appliance for operation, including filling the tank with water and connecting the power supply.
Guidance on how to use the appliance for ironing, checking fabric labels and appropriate settings.
Instructions for performing ironing without steam, adjusting temperature settings as needed for different fabrics.
Procedure for refilling the water tank to ensure continuous steam production during operation.
Steps for safely storing the appliance after use, including cooling and cable management.
Procedure for cleaning the boiler to maintain optimum performance, including descaling steps.
Identifies common problems with the appliance and provides solutions.
To Next Page
General