Why is steam not coming out of my POLTI VAPORELLA SUPER PRO Iron soleplate?
If steam isn't coming out of your POLTI Iron's soleplate, first, ensure the appliance is powered on and that both the power ON-OFF and boiler buttons are activated. Also, check that there is water in the boiler and the indicator light is off.
What to do if water comes out from my POLTI Iron soleplate instead of steam?
If water is coming out of your POLTI Iron's soleplate instead of steam, ensure the ready steam lamp is OFF, indicating the Vaporetto has reached the correct pressure. Adjust the temperature knob on the iron to the medium/maximum value. If the boiler has been over-filled, push the steam button on the Iron (directing the steam flow on to a cloth) till steam comes out from the holes of the Iron soleplate.
Why does my POLTI VAPORELLA SUPER PRO leave water drops on the fabric?
If you notice water drops on the fabric while ironing with your POLTI Iron, it might be because the ironing board cover is wet and cannot handle the steam's power. Consider using a shaft with a grille to prevent condensation, or iron on surfaces that allow steam to permeate. Check that the shaft is suitable.
Why does so little steam come from my POLTI VAPORELLA SUPER PRO soleplate?
If only a little steam is coming from your POLTI Iron soleplate, it could be because the steam is dry, making it barely visible but still effective. This is normal, especially in high-temperature/low-humidity environments.
To Next Page
General