Poly-Wood ECT18 - User Manual

__(2) Braces
9/11/06
All screws are truss head type B All hardware is SS
Description
Qty.
TOOLS NEEDED
Phillips head screwdriver
Step 1
__(2) Sideframes
Attach sideframes to table top
using (4) 2" screws
Assembly Instructions
__(1) Hardware pack
__(1) Table top
Step 2
Attach braces to sideframes
using (4) 2" screws
Model: ECT18, ECT26
A - 14x2" Screw
8

Summary

Assembly Instructions

Step 1: Attach Sideframes to Table Top

Instruction to attach sideframes to the table top using four 2-inch screws.

Step 2: Attach Braces to Sideframes

Instruction to attach braces to the sideframes using four 2-inch screws.

Tools Needed for Assembly

Lists the required tool for assembly: a Phillips head screwdriver.

Cleaning and Maintenance Guide

Furniture Cleaning Recommendations

Guidance on cleaning Poly-Wood furniture using soap, warm water, or a bleach solution.

Hardware Care and Maintenance

Information on cleaning and protecting stainless steel hardware, including potential corrosion.

Product Warranty Information

Residential and Commercial Warranty

Details warranty coverage for furniture components, excluding normal wear and misuse.

Cushion Warranty Terms

Specifies a one-year warranty for cushion defects, excluding wear and improper use.

Poly-Wood ECT18 Specifications

General

Category	Indoor Furnishing
Collection	Nautical
Seat Height	18 in
Material	Polywood lumber
Weight Capacity	300 lbs
Maintenance	Cleans easily with soap, water, and a soft-bristle brush. Resistant to stains, corrosive substances, salt spray, and other environmental stresses.
Sustainability	Made with genuine POLYWOOD® lumber that contains recycled content.