PolyScience Smoking Gun User Manual

CARE & STORAGE:
gnikomS eht erots ot dnats deilppus eht esU •
Gun™ in an upright position when not in use.
gnihsaw yb lerrab latem eht naelc yllacidoireP •
it by hand with soapy water or by placing in a
dishwasher. The barrel may be removed from
the plastic body of the unit by loosening the set
screw on the underside of the barrel and then
using a gentle twisting/pulling motion. Allow
to dry completely before reassembly or use. To
replace, push into place, making sure that the
smoking chamber is facing up.
washing it by hand with soapy water. To access
turn the chamber upside down, and then gently
push a narrow object (such as a bent paper clip)
through one of the holes on the bottom of the
until seated.
hand as needed using soapy water. Allow to dry
completely before reassembly or use.
dedeen sa denaelc eb yam ydob citsalp ehT •
using a slightly damp towel. DO NOT USE WET
TOWELS, IMMERSE IN WATER, OR PLACE
UNDER RUNNING WATER TO CLEAN AS THIS
WILL DAMAGE THE DEVICE AND VOID THE
WARRANTY.
Set Screw
lter for cleaning
by gently pushing a narrow object through the holes
on the bottom of the metal barrel.

PolyScience Smoking Gun Specifications

General

Brand	PolyScience
Model	Smoking Gun
Category	Smokers
Language	English