Polywood AD5030 - Polywood Round Table Assembly RCT38;RKT38; Step 1: Attach Legs and Braces to Tabletop; Step 2: Secure Braces to Legs; Tools and Hardware for Table Assembly

Model: RCT38, RKT38
Step 1
Lay table top on flat surface.
Attach legs to table top and braces to legs
using (8) 2 1/2" screws.
(1) Table top
(4) Legs
(2) Short Brace
(2) Long Brace
(1) Hardware pack
Short brace
TOOLS NEEDED
4MM HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
Removable table plug
included in table.
Step 2
Attach braces to legs using
(4) 2 1/2" screws.
Qty.
Description
Long brace
.27 X 2-1/2 SOCKET WAFER A
12
ASSEMBLY INSTRUCTIONS
ALL HARDWARE IS STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
9/17/2012