Polywood R100 - User Manual

Other manuals for Polywood R100

Assembly Instructions4 pages

Need help?

Do you have a question about the Polywood R100 and is the answer not in the manual?

Summary

POLYWOOD R100 Rocking Chair Assembly Guide

Step 1: Attach Braces and Back Frame

Attach long brace, short brace, and back frame using screws for the R100 chair.

Step 2: Insert Head Piece

Insert the head piece into the top post and repeat Step 1 on the other side.

Step 3: Attach Rocker Bottoms

Attach rocker bottoms using screws, partially threading them first for proper fit.

Tools Needed for R100

Lists required tools for R100 assembly, including hex keys and T-handles.

POLYWOOD SBT18;SBT26 Assembly Guide

Step 1: Attach Sideframes to Table Top

Attach sideframes to the table top using screws for the SBT series.

Step 2: Attach Braces to Sideframes

Attach braces to the sideframes using screws for the SBT series.

Tools Needed for SBT

Lists required tools for SBT assembly, including hex keys and T-handles.

This document provides assembly instructions for two Polywood products: the R100 rocking chair and the SBT18/SBT26 table. Both products are designed for durability, featuring hardware made of coated stainless steel.

Polywood R100 Rocking Chair

Function Description:

The R100 is a rocking chair designed for comfortable seating and gentle rocking motion. It consists of a seat, back, sideframes, rocker bottoms, and a headpiece, all assembled to form a sturdy and relaxing piece of furniture.

Important Technical Specifications:

The assembly requires specific hardware:

Screws:
- (4) .27 x 3 socket wafer screws (Type B) for attaching the long brace, short brace, and back.
- (2) .27 x 2 1/2 socket wafer screws (Type A) for attaching the seat.
- (4) 14 x 3 screws for attaching the rocker bottoms.
Included Components:
- (1) Hardware pack
- (2) Sideframes
- (2) Rocker bottoms
- (1) Back
- (1) Seat
- (1) Long brace
- (1) Short brace
- (1) Head piece
Tools Needed:
- 4mm Hex Key (Allen, T-handle) - included.
- Short 4mm Hex Key (for drill) - included.

Usage Features:

Assembly Steps:
1. Step 1: Attach the long brace, short brace, and back to the sideframes using four .27 x 3 screws. Then, attach the seat using two .27 x 2 1/2 screws.
  - Note: The front of the seat is wider.
  - Note: The hardware is coated stainless steel unless otherwise specified.
2. Step 2: Insert the headpiece into the top of the post. This step is repeated for the other side of the chair.
3. Step 3: Attach the rocker bottoms using four 14 x 3 screws.
  - Note: Partially thread both screws into the post before tightening.
  - Note: The rocker bottoms may require some flexing for proper fit during installation.

Maintenance Features:

The use of coated stainless steel hardware indicates a design choice for enhanced durability and resistance to corrosion, which typically reduces maintenance requirements for outdoor or high-moisture environments.

Polywood SBT18/SBT26 Table

Function Description:

The SBT18 and SBT26 models are tables designed for general use, likely as side tables or small dining tables, given their structure. They consist of a tabletop, sideframes, and braces, providing a stable surface.

Important Technical Specifications:

The assembly requires specific hardware:

Screws:
- (8) .27 x 2 socket wafer screws (Type A) for attaching sideframes to the tabletop and braces to the sideframes.
Included Components:
- (1) Tabletop
- (2) Sideframes
- (2) Braces
- (1) Hardware pack
Tools Needed:
- 4mm Hex Key (Allen, T-handle) - included.

Usage Features:

Assembly Steps:
1. Step 1: Attach the sideframes to the tabletop using four 2" screws.
2. Step 2: Attach the braces to the sideframes using four 2" screws.
  - Note: All hardware is stainless steel.

Maintenance Features:

The explicit mention that "ALL HARDWARE IS STAINLESS STEEL" highlights a key maintenance feature, indicating high resistance to rust and corrosion, making the table suitable for various environments with minimal rust-related upkeep.