Pond Boss NLFTN User Manual

Pond Nozzle Kit
ITEM #NLFTN
PACKAGE CONTENTS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement parts.
• E
stimated Assembly Time: 5 minutes
• No tools required for assembly.
ASSEMBLY INSTRUCTIONS
1. C
onnect the two extension tubes (A) with the coupler (B).
Fig. 1
NOTE: Use the coupler (B) if no spitters are to be used.
Part
Description
Quantity
A
Extension tube
2
B
Coupler
1
C
Adapter for 1/2” outlets
1
D
Adapter for 3/4” outlets
1
E
3-tier fountain head
1
F
Trumpet fountain head
1
G
Waterbell fountain head
1
H
Foam-jet fountain head
1
I
Lower fountain head nozzle
1
J
Diverter valve
1
E
B
A
A
D
G
F
H
J
C
I
A
B
A

Pond Boss NLFTN Specifications

General

Model	NLFTN
Material	Resin
Pump Included	Yes
Power Source	Electric
Voltage	120V

Summary

Preparation

Assembly Instructions

Connect Extension Tubes

Connect the two extension tubes (A) with the coupler (B) for initial assembly.

Attach Diverter Valve

Connect extension tubes (A) to the diverter valve (J), ensuring correct orientation.

Connect Tubing to Diverter

For 1/2 in. tubing, connect it to the diverter valve's second output for a spitter.

Connect Fountain Head

Attach the fountain head to the top extension tube and adjust diverter valve flow.

Select and Assemble Fountain Head

Choose a fountain head for the desired water effect and assemble it as shown.

Connect Pump with 3/4" Adapter

Use the 3/4" adapter to connect pumps (PF350, PP225, PP350, PP575) to extension tubes.

Connect Pump with 5/8" Adapter

Use the 5/8" adapter to connect the PF500 pump to the fountain head kit.

Care and Maintenance