1. Be sure to read, understand and comply with all the instructions in this manual.
2. Before using this product, check to see if there is any crack or short of
plastic parts on the shell, pay attention to the insulation around the connectors.
Please do not use the product if it is damaged.
3.
DO NOT use the device on anything that could possibly have a surge amp
rating greater than 16 amp. The loading power of electrical appliances cannot
exceed the rated power of this product (1840W at 115V).
4. DO NOT use the device near the max rated specs (in most cases, the true
RMS Current will be around 15A) for a long time to avoid any unwanted
damage or accident.
5. DO NOT use the equipment in wet environments, keep your hands dry.
6. DO NOT operate the monitor around explosive gas, vapor or dust.
7. DO NOT open the case of the meter or alter the internal circuit of the meter.
8. DO NOT allow children to operate this device, keep children stay away
from the monitor.
9. DO NOT use or store the device in an environment of high temperature,
humidity, explosive or inflammable field. The performance of the meter may
deteriorate after dampened.
10. NOTE: The monitor work with all standard power supply, an inferior
quality power source (with too much harmonic distortion) such as unqualified
inverter may cause damage or shorten device’s lifespan.
To Next Page
Loading...
Need help?
General
