Features and Controls
Six-Speed
,-
This is your shift pattern. Here’s how to
operate your transmission:
0
1
(First Gear)
-
Press the clutch
pedal and shift into
“1.”
Then, slowly
let up on the clutch pedal as you
press the accelerator pedal.
You
can shift into
“1”
when you’re
going less than
20
mph
(30
km/h).
If
you’ve come to a complete stop and
it’s hard to shift into
“1,”
put the shift
lever in “Neutral” and let up on
the
clutch. Press the clutch pedal back
down. Then shift into
“1.”
2 (Second Gear)
-
Press the clutch
pedal as you let up on the accelerator
pedal and shift into
“2.”
Then, slowly
let up
on
the clutch pedal as
you
press the accelerator pedal.
3,4,5
and
6
(Third, Fourth, Fifth
and
Sixth
Gears)
-
Shift into
“3,”
“4,”
“5”
and
“6”
the same way you do
for
“2.”
Slowly let up on the clutch
pedal as
you
press the accelerator
pedal.
To Stop
-
Let up on the accelerator
pedal and press the brake pedal. Just
before the vehicle stops, press the
clutch pedal and the brake pedal,
and shift to “Neutral.”
Neutral
-
Use this position when
you start or idle your engine.
R
(Reverse)
-
To
back up, press
down the clutch pedal and shift into
“R.”
Let up on the clutch pedal slowly
while pressing the accelerator pedal.
. .
.60
To Next Page
Loading...
