Your six-speed manual transmission
has a feature that allows you to safely
shift into
“R’
(Reverse) while
the
vehicle
is
rolling (at less than
3
mph). You will be
“locked-out” if you try to shift into “R”
(Reverse) while your vehicle is’ moving
faster than
3
mph.
If you have turned your ignition off and
wish to park your vehicle in Reverse, you
will have to move the shift lever quickly
to the right, “crashing” through the high
load spring and then into gear.
SKIP
SHIFT
;kip
Shift Light (5.7L
LT1
Engine)
Yhen this light comes on, you can only
hift from
“1”
(First) to
“4”
(Fourth) gear
nstead of “1” (First) to “2” (Second)
gar. This helps you to get
the
best
lossible fuel economy.
’his light will come on under these
onditions:
The engine coolant temperature is
greater than 170°F (77”C),
You are going
15-20
mph
(24-32
km/h),
and
You are
at
35%
throttle or less.
When this light
is
on, the gear shift lever
will let you shift from
“1”
(First) gear to
“4”(Fourth) gears only. Once you are
in
“4”
(Fourth) gear, you can press the
clutch again and shift into another gear.
Follow the shift speeds in this chart when
the
“SKIP
SHIFT” light is on.
Computer Aided Manual Transmission
Shift Speeds:
1st to 4th.
.
,
.
,
.
.
15
mph
(24
km/h)
4th to 5th
......
25 mph
(40
km/h)*
5th
to
6th
......
40 mph (64 km/h)**
Each time you come to
a
stop,
the
engine’s Electronic Control Module
(EGM)
determines when to activate the
“SKIP SHIFT” upshift system. Use
“2”
(Second) gear only when
you
accelerate
very quickly from’a stop.
You
can then
follow the full gear shift pattern.
*30
mph
(48
km/h) when accelerating
to highway speeds.
**45
mph
(72
km/h) when accelerating
to highway
speeds.
61
’.
,
.
To Next Page
Loading...
