6-15
As in the chart shown previously, if you have the
5.7L V8 engine, SAE 5W
-30 is best for your vehicle.
However, you can use SAE 10W
-30 if it’s going to
be 0
_
F (
-18
_
C) or above. These numbers on an oil
container show its viscosity, or thickness. Do not use
other viscosity oils, such as SAE 20W-50.
As shown in the following chart, if you have the
3800 V6 engine, SAE 10W-30 is best for your vehicle.
However, you can use SAE 5W
-30 if it’s going to be
colder than 60
_
F (16
_
C) before your next oil change.
When it’s very cold, you should use SAE 5W-30.
These numbers on an oil container show its viscosity,
or thickness. Do not use other viscosity oils, such
as SAE 20W
-50.
3800 V6 Engine
To Next Page
Loading...
Need help?
General
