Power Seat
If the vehicle has a
power seat, the control
used to operate it is
located on the outboard
side of the driver’s seat.
To adjust the seat, do any of the following:
• Move the seat forward or rearward by sliding
the control forward or rearward.
• Raise or lower the front part of the seat
cushion by moving the front of the control up
or down.
• Raise or lower the rear part of the seat
cushion by moving the rear of the control up
or down.
Manual Lumbar
If your vehicle has this feature, the handle is
located on the outboard side of the driver’s seat.
Move the handle up repeatedly to decrease lumbar
support. Move the handle down repeatedly to
increase lumbar support.
2-door Model Shown, 4-door Model Similar
10
To Next Page
Loading...
