Pool Blaster Centennial Li User Manual

®
Installation Guide - NiMH to Lithium
Need Help? Contact Customer Care at (732) 967-9888
Upgrading the Pool Blaster® Centennial Li/Eclipse Li Motor Box
1
Why did my new motor box kit come with a charger?
This complete kit replaces all of the electronics for the Pool
Blaster® Centennial Li/Eclipse Li and will guarantee that your
machine will be repaired and increase the longevity of your
battery.
Your old charger will not work. Please dispose of
your original charger.
STEP 1: Use drill or screwdriver to unscrew the
four screws located at the exhaust of the unit
(2 screws on each side). Place screws to the side.
STEP 2: Remove old motor box from the unit.
Your new kit includes:
Motor Box (P20X003LI)
Charger (LC099-2S-US-EU)
Phillips screwdriver or battery
powered screwdriver
(set at low torque setting)
Pliers and cutters
You will need the following tools:

Pool Blaster Centennial Li Specifications

General

Brand	Pool Blaster
Model	Centennial Li
Category	Swimming Pool Vacuum
Language	English

Summary

Upgrading the Pool Blaster Centennial Li/Eclipse Li Motor Box

STEP 1: Unscrew Exhaust Screws

Unscrew four screws at the unit's exhaust before proceeding with the upgrade.

STEP 2: Remove Old Motor Box

Carefully detach the existing motor box from the main unit.

STEP 3: Clip Lanyard from Old Cap

Detach the lanyard from the old motor box cap using appropriate tools.

STEP 4: Separate Unit Shells

Unscrew the main unit's shells to gain access to internal components.

STEP 5: Secure Lanyard in Clip

Insert and secure the lanyard into the metal clip and shell openings.

STEP 6: Reassemble Unit Shells

Rejoin the unit shells and fasten them with the original screws.

STEP 7: Install New Motor Box

Place the replacement motor box into the designated area within the unit.

STEP 8: Final Assembly and Tightening

Reinsert exhaust screws, tighten, attach the new motor box cap, and close the latch.