Pool Blaster VOLT FX-8 - Assembly and Charging Procedures; Attaching Vacuum Head and Nose Cap; Charging Your Cleaner; Operation and Maintenance

LONG TERM STORAGE
Always clean the Nose Cap and Filter Bag before storing.
Always store your Cleaner in a cool, dry, indoor shelter.
Recharge the Cleaner for 3 hours after each month of inactivity.
1. Vacuum Head
2. Nose Cap / Debris Chamber
3. Filter Bag
4. Cleaner Body
5. Battery Charger
6. Microlter Bags
(not shown)
7. LUBE Packet
CHARGING YOUR CLEANER
ATTACHING THE VACUUM HEAD & NOSE CAP
Initial Charge (New Cleaner)
3-4 Hours
Recharging (After Complete Discharge) 3 Hours
ATTACHING THE POOL POLE
TURNING THE CLEANER ON & OFF
MAINTENANCE
Cleaning the Filter Bag You should remove and clean the Filter Bag
following each use.
Lubricating the ON/OFF Knob
Periodically the rubber “O”-Rings which
circle the ON/OFF Knob should be treated
with the LUBE included with your cleaner.
Turn the knob clockwise, as far
as possible, to prevent leakage.
1
2
3
4
5
ON
OFF
7