3
Required Tools
•
Drill/driver/screw gun with 5/16 hex driver bit
•
25 foot tape measure
•
Flat blade screwdriver
•
5/16 & 7/16 wrenches or sockets
Select the Location
Select a location at one of the narrow ends of the pool. The location must:
•
Be away from the ladder
•
Have access to a GFI protected 120V AC receptacle.
•
Provide a mounting location for the power supply
•
The drive side stand may be placed on either side of the pool
Suggested Layout
GETTING STARTED
To Next Page
Loading...