Read and follow all safety information and instructions. Keep for future reference. Failure to follow
these warnings and instructions can result in serious injury or death to users, especially children.
3.
ASSEMBLY and OPERATION of your JET RUNNER MOTORIZED RIDE-ON
Remove the 5 screws from the front panel of the steering
unit using the included Philips-head screwdriver.
1.
Once the screws have been taken out, remove the front panel covering
the battery holder. Remove the battery holder from the steering unit.
2.
Insert 8x D-cell batteries according to their
polarity into the battery holder. Each side of
the holder accomodates 4 D-cell batteries.
Once the batteries have been inserted, place
battery holder back into the battery
compartment, and close the compartment
following the instructions in reverse.
3.
To Next Page
Loading...