Poolguard PGRM-SB - Certification; Inspection

CERTIFICATION
NSF International Certies that the POOLGUARD Pool
Alarm model PGRM-SB conforms to the requirements of
ASTM F2208—Standard Safety Specication for Residential
Pool alarms.
1. Certied to ASTM F2208-2008 for performance.
2. Certied to NSF/ANSI Standard 50 for material safety.
Certied for pool and spa end use temperatures.
POOLGUARD Pool Alarm Model PGRM-SB will meet or
exceed all parts of the Tennessee Pool Alarm requirements
of the Katie Beth Law.
INSPECTION
POOLGUARD “Safety Buoy” is packaged in a shipping
carton that minimizes the chance of damage due to handling.
Check for damage and conrm that the contents of the
carton include the following items:
• POOLGUARD “SAFETY BUOY” ALARM
• RED TETHER STRING & TETHER CLIP
• REMOTE RECEIVER AND POWER SUPPLY
• OPERATING INSTRUCTION MANUAL
• RED RESET/SLEEP KEY
• RED POOLGUARD “SAFETY BUOY” ALARM
STORAGE STAND
If an item is missing or lost, contact either the place of
purchase or PBM Industries, Inc. to purchase a replacement,
contact us at 1-800-242-7163
2 19
QUICK DO’S AND DON’TS
• Do read the manual carefully
• Do install a 9 volt battery
• Do untie the bow on the power supply
• Do test the alarm properly
• Do turn your return line eyeball fittings towards
the bottom of the pool
• Do use the red storage stand
• Do remove alarm before swimming
• DON’T leave alarm in pool while swimming
• DON’T drop your alarm, it may break
• DON’T attach your alarm to a pool ladder
• DON’T install your alarm immediately after
swimming
• DON’T turn your return eyeball fittings towards
the top of the pool
• DON’T use your alarm on extremely windy days
• DON’T lay the alarm on the ground
PG Buoy Manual 5.5x8.5 031116.indd 2 3/22/16 2:02 PM