PoolMaster 72900 Series - NBA Game Assembly Instructions; Step 1: Insert Upright into Base; Step 2: Attach Backboard to Upright; Step 3: Attach Hoop Base

Assembly Instructions
2
Step 3
•Align holes on Hoop Base with
holes on Backboard and Upright.
Secure with (4) ¼ - 20 x 2" Bolts.
Step 4
•Attach Net to Hoop.
Step 5
•Fill Base with sand or water and cover
opening with Base Cap. For best
results, use sand to ll base.
Step 6
•Use Ball Needle and a hand pump
(not included) to inate Ball.
Step 7
•Place NO SLAM DUNK label on front
of Base
poolmaster.com
1” Bolts x3
Step 2
•Attach Backboard to Upright using
(1) ¼ - 20 x 2" Bolt through the
center hole on the Backboard.
•Insert Upright into Base.
Secure with (3) 1/4 - 20 x 1"
Bolts and Washers.
Step 1