To Next PageTo Next Page
Need help?Do you have a question about the PoolRite Titan XL-40 and is the answer not in the manual?
Explanation of how the Diatomaceous Earth filter operates and its components.
Contents of the filter system carton, including couplings and valve.
Contents of the pump carton, including motor set and couplings.
Steps for connecting the pump to the baseplate and filter system.
Connections required for the filter system to the pool and waste.
Procedure for priming the pump when installed above water level.
Steps to start the filter, including adding DE and checking pressure.
Detailed steps for cleaning the filter septums and associated components.
Solutions for black spot algae in fibreglass pools, including pH adjustment.
Treatments for black spot algae in concrete pools, focusing on pH and algaecide.
Checks and treatments for green algae, including pH and chlorine levels.
Checks and treatments for brown algae, including pH and algaecide.
Causes and solutions for milky water, including filter operation checks.
Reasons for rapid pressure increase and troubleshooting steps.
Causes of air bubbles returning to the pool and troubleshooting steps.
Checks for leaks causing water to drain when the filter is off.
Checks for issues causing filter powder to return to the pool.
Troubleshooting steps for loss of pump suction power.
Troubleshooting for pH, electrodes, and salt levels with a salt water chlorinator.
General| Flow Rate | 40 GPM |
|---|---|
| Turnover (8 Hours) | 19, 200 gallons |
| Working Pressure | 50 PSI |
| Inlet/Outlet Size | 1.5 inches |
| Filter Type | Sand |
| Horsepower | 1.5 HP |
| Tank Material | Fiberglass |
| Valve Type | Multiport |
