Visit PASMA and HSE for further
reference.
Page 2
INTRODUCTION
MI TOWER STAIRS is a versatile and high quality mobile access tower providing one work platform for one person used
throughout the building and construction industry for both indoor and outdoor access solutions, where a stable
and secure platform is required. Ideal for maintenance and installation work or short term access. It is designed
in accordance with the latest testing and quality standards. MI TOWER STAIRS complies with BS EN 1004 -1 : 2020 and
WAHR with vertical ladder access and designed for Class 3 loadings. Platform heights between 2.2m & 4.7m
internal / external. Tower designation is EN1004-3-2/4-XXXD-H2.
This instruction manual is in compliance with BS EN 1004-2-en.
Verification and assessment documentation is held by POP UP Products Ltd.
Our priority is to help ensure the safe operation of our products, so please pay particular attention to the safety
tips on pages 8 & 9.
We want you to enjoy the safe and responsible use of MI TOWER STAIRS with the minimum of fuss and this guide is
designed to get you up and running as quickly and as safely as possible.
We recommend that you read this guide prior to assembling and using your MI TOWER STAIRS.
This instruction manual shall be available on the location of use of your MI TOWER STAIRS .
Your MI TOWER STAIRS shall only be used in accordance with this assembly guide without modification and
national regulations.
User training courses cannot be a substitute for instruction manuals but only complement them.
This product shall only be used according to the instruction manual.
Only original Pop Up Products MI TOWER STAIRS components, in undamaged condition as specified in this instruction
manual, shall be used to assemble this access tower.
Pop Up Products Limited cannot accept responsibility in the event of an accident occurring because of mixing
components from different manufacturers.
Mobile access and working towers designed in accordance with EN 1004-1 are not anchor points for
personal fall arrest equipment.
Working is only permitted on a platform with complete side protection, including guardrails and toeboards.
Maximum uniformly distributed load permitted on a single platform is 150Kg, ensuring the hatch area is always
kept clear of materials to allow unimpeded access to the platform.
To Next Page
Loading...