OPERATION(Cont.)
90°
Method 1
Hold the switch on the front handle tightly to allow the front bearing to clamp the cable, align the
clogged pipe, then turn the folding handle straight, rotate in a clockwise direction, making the cable
protrude forward until it reaches the blocked position.
Warning: Do not touch the rotating cable during operation to avoid injury.
Method 2
Wear the gloves, pull the flexible cable out of the drain auger by hand and make it reach into the
clogged pipe.（ Do not press and hold the switch when you pull the flexible cable by hand.)
Extend the cable to the clogged pipe
To Next Page
Loading...
