OPERATION(Cont.)
Clean the blockage
Make sure the cable has reached the blocked position, release the switch on the handle to let the front
bearing release the cable and the cable is automatically locked at this time, then rotate the handle in a
clockwise direction, the cable will not forward or retract and only rotate to clean
the pipe blockage.
Note: Please rotate the handle in a clockwise direction so that the cable can catch the obstructions
tightly and pull it out.
IF YOU CAN NOT HOOK THE BLOCKED SUCCESSFULLY in a clockwise direction, you can release
the switch on the handle, then turn it forward several times and rotate backward several times,
operation repeatedly, please note that the last rotating direction is supposed to be clockwise, ensuring
to catch the blockage can be pulled out quickly.
To Next Page
Loading...
