Need help?Do you have a question about the Porkka Future DF 720 and is the answer not in the manual?
Ensure free air circulation, avoid heat sources, and level the cabinet.
Connect to an earthed socket protected by a 10A fuse, 240V/50Hz/1-phase.
Locate ON/OFF switch, check pilot lamp, ensure holding temperature is reached before loading.
Explains the function of buttons and LEDs on the control panel.
Describes standby, normal operation, and defrost indicators on the display.
Details how to check and adjust the temperature setpoint using control buttons.
Indicates 'HI' for high and 'LO' for low temperature alarms; buzzer can be muted.
Explains probe faults ('E1', 'E2'), door warnings ('DO'), and condenser cleaning warnings ('CLN').
Details the manual timer use for blast chilling and post-chilling operation for DC models.
Explains the control panel components and blast freezing switch operation for DF models.
Details monthly cleaning, including power off, removing parts, and using mild agents.
Crucial warning against using sharp instruments to remove ice from the evaporator.
Guides on checking power, defrost, overload, and air circulation before calling service.
Step-by-step guide to safely change the light bulb, including safety precautions.
Fields for product type, serial number, and purchase location/date.
Outlines the 12-month warranty, covered items, and common exclusions.
Ensure free air circulation, avoid heat sources, and level the cabinet.
Connect to an earthed socket protected by a 10A fuse, 240V/50Hz/1-phase.
Locate ON/OFF switch, check pilot lamp, ensure holding temperature is reached before loading.
Explains the function of buttons and LEDs on the control panel.
Describes standby, normal operation, and defrost indicators on the display.
Details how to check and adjust the temperature setpoint using control buttons.
Indicates 'HI' for high and 'LO' for low temperature alarms; buzzer can be muted.
Explains probe faults ('E1', 'E2'), door warnings ('DO'), and condenser cleaning warnings ('CLN').
Details the manual timer use for blast chilling and post-chilling operation for DC models.
Explains the control panel components and blast freezing switch operation for DF models.
Details monthly cleaning, including power off, removing parts, and using mild agents.
Crucial warning against using sharp instruments to remove ice from the evaporator.
Guides on checking power, defrost, overload, and air circulation before calling service.
Step-by-step guide to safely change the light bulb, including safety precautions.
Fields for product type, serial number, and purchase location/date.
Outlines the 12-month warranty, covered items, and common exclusions.
To Next Page
General