59
Modas operating instructions
Application use:
Modas is an application tool that represents measured variables (RAM
variables) and adjustable variables (parameters and graphs) in various
used displays. It was developed to recall standard measured values and
to adjust the most important adjustable values quickly.
To install the software, load the enclosed CD and start the SETUP.EXE
file. MODAS must be checked.
System requirements:
Hardware:
Notebook: Operating system WIN95/98, Win 2000, Windows XP,
166 MHz; 32 MB Ram; LPT1 interface
KIC2 interface with Modas release
The connection between the PC and ECU is made through a KIC2
interface. MODAS release (licence) is made via the KIC2 interface.
Files:
ASAP and CFG files:
Information about the page and display format can be found in the
configuration file MODAS.CFG and/or MODAS.CFV. The information about
the ECU programme status is saved in the editable files *.A2L and/or
*.A2V. Project and programme version specific files are saved in the
MODAS sub directory \CONFIG.
The files are created by Bosch Motorsport and may not be changed!
Bin file:
When MODAS is started for the first time, a binary file is created that
allows the software to start faster in the future.
To Next Page
Loading...
Need help?
General
