Porsche 912 E - Technical Data

TECHNICAL DATA
Rear suspension
Springing
Torsion bars
Height setting
(at
DIN curb weight)
Differ.ence in height
left to right
Spring strut angle
with air conditioner
Shock absorbers
Make
Wheelbase
(at DIN curb weight)
Track
(at DIN curb weight)
Printed
in Germany
Rear Wheel Suspension, Propeller Shaft
42
Independent, with control arms
One round torsion bar per wheel transversely
mounted
23 mm dia.
37 mm from center of cross tube to center
of wheel
Max. 8 mm
40°
0
40 30'
Double action, hydraulic
Boge
2271 mm
1330 mm
Technical Data
42.- 01