Porsche 912 E - Page 72

20
Fuel System
2. Tighten suction hose clamp:
3. Make electrical connections. Watch polarity
marks.
4. Install rubber boots.
Note
Make sure that the boot,s fit properly to
prevent corrosion on the terminals.
5. Connect pressure hose and hold tight with
hose
clamp.
6. Remove commercial hose clip.
20 - 2
Removing and Installing Fuel Pump
7. Check hose connections for leaks.
8. Install guard.
9. Connect battery ground strap.
Printed
in Germanv