Windows and Sliding Roofs 89
2. Unclip the clip-on frame on the overhead
operating console using your finger or
a screwdriver and carefully pull it down.
Make sure not to damage the clip-on frame.
3. Remove the clip-on frame completely.
4. Unclip the overhead operating console in
a downward direction using your finger or
a screwdriver and fold it down.
5. Insert the key fully into the motor and turn it
either to the left or right, depending on
whether you want to open or close the roof.
Press the key up while turning it so that it does
not slip out and become damaged.
6. Remove the key and put it back in its storage
position.
7. Clip in the overhead operating console and
clip-on frame.
f Have the fault remedied at your authorized
Porsche dealer.
To Next Page
Loading...
Need help?
General
