What to do if my PORTAGE & MAIN Furnace has too little heat?
If your PORTAGE & MAIN Furnace isn't producing enough heat, here are several things you can try: * Add wood or build a fire. * Check for leaks and add water. * Inspect the electrical circuits. * Check the pump. * Vent the system. * Inspect the fan and replace if necessary.
What to do if my PORTAGE & MAIN Furnace is producing too much heat?
If your PORTAGE & MAIN Furnace is overheating, you can try the following: * Clean, lubricate, and reinstall the relevant components. * Clean metal-to-metal surfaces. * Check the aquastat. * Check the thermostat. * Check the gasket on the ash door.
How to prevent creosote buildup in my PORTAGE & MAIN Furnace?
To address creosote buildup in your PORTAGE & MAIN Furnace, consider the following: * Clean metal to metal surfaces. * Insulate or repair chimney insulation. * Use a mix of dry and harder wood, such as Poplar, Birch, or Tamarack.
General| Brand | PORTAGE & MAIN |
|---|---|
| Model | BL 2840 |
| Category | Furnace |
| Language | English |
To Next Page