Portek Post Driver - Specifications; Technical Specifications

7
Specifications
Max power and speed: 1500W / 9,000rpm
Max torque and speed: 2.5N.m / 5,000rpm
Impact frequency: 700 ~ 1,350rpm
Impact energy: 20 ~ 55J
Noise level: LpA: 104dB / LwA: 115dB
Vibration level: 13.891m/s
2
/ K=1.5m/s
2
Engine: Single cylinder, air-cooled,
2 stroke petrol
Cylinder diameter × stroke: 44mm × 34mm
Capacity: 52cc
Max power output: <1.42kW
Carburettor: MZA 102H
Ignition: Non-contact electronic ignition
Spark plug type: L8RTC
Starting method: Recoil type ‘pull’ starter
Fuel mixture: 25:1 - petrol:oil mixture
Fuel tank capacity: 1.3l
Fuel consumption rate: ≤0.60l/h
Weight of complete unit: 21kg
Length × width × height: 805mm × 305mm × 270mm
Post Driver box contents
Post Driver with main 4" capacity post holder fitted.
Reducing adaptor for using plastic post holders.
x3 plastic piling sizing rings: 20-49mm, 50-69mm and 70-100mm.
Lubricating grease (60g).
Instruction booklet.
Tool kit - comprising of: spark plug, spark plug handle, 4mm inner hexagon spanner,
5mm inner hexagon spanner, inner hexagon spanner 6mm, T-shaped inner hexagon
spanner, straight screw-driver and 8-10mm open spanner.