Need help?Do you have a question about the Portek ULTRA Mk2 and is the answer not in the manual?
General| Nominal Voltage | 230V |
|---|---|
| Nominal Power | 235W |
| Frequency | 50Hz |
| Speed | 3, 000 RPM |
| Cutting Angles | 40° Left to Right |
| Top Plate Angles | 40° to 90° |
| Sound Pressure Level | 68.3 dB(A) |
| Sound Power Level | 81.3 dB(A) |
| Hand Arm Vibration | 3.675 m/s[2] |
Weight and Dimensions| Wheel Dimensions | 145mm Dia. x 3.0mm, 145mm Dia. x 3.2mm, 145mm Dia. x 4.5mm |
|---|---|
| Shaft Diameter | 22mm |
| Weight | 5.8KG |
Crucial safety instructions and precautions to ensure safe operation and prevent damage or injury.
Instructions for unpacking, checking parts, and mounting the sharpener on a work surface or wall.
Detailed list of all components and their corresponding labels for the chainsaw sharpener.
Step-by-step guide for operating the ULTRA Mk2 to sharpen chainsaw chains correctly.
Instructions and safety precautions for safely removing and replacing the grinding wheel.
Procedure for replacing the work light bulb, including safety and bulb specifications.
Essential tips and guidance for achieving optimal chainsaw chain sharpening results.
To Next Page
