Porter-Cable 315-1 User Manual

Explains the function and use of polarized plugs to prevent electric shock.

Details about the tool's motor specifications and power requirements.

Guidance on selecting appropriate extension cords based on gauge and length.

Introduction to the operating instructions for the Porter-Cable Circular Saw.

Guidance on choosing the appropriate blade for different sawing tasks and materials.

Step-by-step instructions for safely removing the saw blade.

Step-by-step instructions for safely installing a new saw blade.

Instructions on how to use the jackshaft wrench for blade installation and removal.

Procedures for adjusting the saw's cutting depth based on material thickness.

Information regarding the auxiliary blade guard and its proper use.

Details on the telescoping guard's function, maintenance, and safety warnings.

How to check and adjust the saw's positive stop for a precise 90-degree cut.

Instructions for adjusting the saw for bevel cuts and setting the 45-degree positive stop.

How to use the base's edge to guide the saw along the cutting line.

Explains crosscutting and how to perform it with the saw.

Instructions for ripping wood lengthwise using the saw or rip guide.

Detailed steps for making pocket cuts (cuts not starting from the edge) with the saw.

Instructions on cleaning the tool, including warnings about solvents and compressed air.

Steps to take if the tool fails to start, checking the plug, fuses, or circuit breakers.

Recommendations for professional servicing and repair by authorized centers.

Describes a general-purpose blade for various cutting directions and wood types.

Describes a blade for fine, clean cuts on plywood, veneers, and plastics.

Describes an all-purpose blade for fast, smooth cutting in various applications.

Details on carbide-tipped blades that last longer than conventional blades.