To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable 3802L and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Voltage | 120V |
| Power Source | Corded Electric |
| Blade Size | 7-1/4 inches |
| Amperage | 15 amps |
| Arbor Size | 5/8 inches |
| Max Cutting Depth at 90° | 2-7/16 inches |
| Max Cutting Depth at 45° | 1-3/4 in |
Crucial safety warning before starting operations.
Addresses specific chemical warnings mandated by California law.
Safety instructions related to the laser guide feature.
Electrical hookup, extension cord usage, and safety.
Information on motor type, voltage, and current.
Recommendations for selecting appropriate extension cords by gauge.
Overview of the saw's capabilities and specifications.
Lists all items included in the product packaging.
Instructions for safely removing the saw from its packaging.
Lists necessary tools and estimated assembly duration.
Procedures for positioning the cuttinghead and table.
Guide for installing the extension table and fence slide.
Instructions for attaching the dust collection bag.
General overview of the saw's controls and adjustments.
How to securely mount the saw to a workbench.
Procedures for turning the saw on, off, and securing it.
Steps for setting miter angles for cuts.
Adjusting table movement and aligning the fence.
Warnings about the hazard zone and tilting for bevel cuts.
How to position and adjust the sliding fence.
Adjusting the chip deflector and setting bevel positive stops.
Adjusting sliding fits and return spring tension.
Limiting the blade's downward movement for safety.
How to use and calibrate the laser guide.
Fine-tuning laser lines and checking accuracy.
Checking vertical alignment and performing laser maintenance.
Adjusting laser lines for blade kerf width.
Adjusting the blade guard and general operating tips.
Using an auxiliary fence and cutting aluminum.
Techniques for cutting warped material and crown molding.
Cutting specific crown molding angles and building supports.
Step-by-step guide for replacing the saw blade.
How to check and replace motor brushes.
Tips for cleaning, and troubleshooting starting problems.
Details on authorized service and repairs.
Information on obtaining replacement parts and accessories.
Listing of service centers located in Canada.
