To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable 7310 and is the answer not in the manual?
General| No Load Speed | 30, 000 RPM |
|---|---|
| Base Type | Fixed |
| Weight | 3.5 lbs |
| Amps | 5.6 Amps |
| Voltage | 120 V |
| Cord Length | 6 ft |
| Collet Size | 1/4 inch |
Guidelines for maintaining a safe and clear work environment.
Precautions related to electrical connections and usage of power tools.
Measures to ensure operator safety, including alertness and protective gear.
Guidelines for servicing power tools by qualified personnel.
Guidance on choosing and using bits with the laminate trimmers.
Procedure for turning the motor on and off safely.
Step-by-step guide for inserting and securing bits into the trimmer.
Procedure for safely detaching bits from the trimmer.
Procedure for aligning the sub-base for template guide use.
Steps to attach and adjust the base and roller guide assembly.
How to perform flush trimming using the appropriate guide.
Steps for performing bevel trimming with the correct guide.
Setting the cutting depth for the tilt base trimmer.
How to adjust the tilt angle for specific trimming operations.
Procedure for installing and removing bits from the tool.
Setting the cutting depth for the offset trimmer.
Application for trimming the front edge of a 3/4" vertical backsplash.
Trimming into and out of installed backsplash corners.
Accurately scribing backsplash to walls for a precise fit.
Setting the bit exposure for the underscribe trimmer.
Procedure for adjusting the guide plate on the underscribe base.
Instructions for cleaning the tool and its parts.
Common reasons why the tool may not start and how to resolve them.
Details on the tool's lubrication requirements.
Guidance on inspecting and servicing brushes for continued safety.
Information on ordering and using identical replacement parts.
Details on tool servicing, repairs, and warranty service centers.
Information about compatible accessories for the tools.
Details of the one-year limited warranty for Porter-Cable tools.
