Porter-Cable Quicksand 332 User Manual

Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
ESPAÑOL: PÁGINA 17
FRANÇAISE : PAGE 33
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2005 Porter-Cable Corporation
Part No. 913269 - 01-24-05
MODEL
332
MODELS 333
and 334
MODEL
333VS
Double Insulated
Random Orbit Sanders

Porter-Cable Quicksand 332 Specifications

General

Type	Random Orbit Sander
Voltage	120V
Power Source	Corded Electric
No Load Speed	12, 000 OPM
Orbit Diameter	3/32 inch
Pad Size	5 inch
Dust Collection	Yes

Summary

Important Safety Instructions

Safety Guidelines

California Proposition 65

Details warnings about chemicals in dust from sanding and construction activities.

General Safety Rules

Work Area Safety

Guidelines for maintaining a clean, well-lit, and safe work environment.

Electrical Safety

Personal Safety & Handling

Tips on alertness, safety gear, avoiding accidental starts, proper grip, and attire.

Power Tool Use and Care

Guidance on proper usage, maintenance, and care of power tools to ensure safety and longevity.

Additional Specific Safety Rules

Handling and Operation Precautions

Covers specific rules for safe operation, including grip, guards, eye/hearing protection, and dust management.

Additional Safety Rules for Paint Removal

Paint Removal Guidelines

Functional Description

Installing/Removing Abrasive Disc

Step-by-step guide for attaching and detaching abrasive discs for models 332 and 334.

Assembly (Continued)

Installing/Removing Abrasive Disc (Models 333 and 333VS)

Procedure for attaching and detaching abrasive discs for specific sander models.

Dust Collector

Operation

Start and Stop Sander

Speed Control (333VS)

Using the Sander

Sanding Procedure

Steps for securing work, starting the tool, and moving the sander for an even finish.

Maintenance

Changing Back-Up Pad

Belt Replacement

Failure to Start

Service

Service and Repairs