Do you have a question about the Portland 63190 and is the answer not in the manual?
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Addresses practices not related to personal injury.
Discusses safe use and selection of extension cords for electric gardening appliances.
Wear appropriate clothing, goggles, hard hat, and gloves for safe operation.
Ensure switch is off, do not carry plugged-in appliance, maintain balance.
Individuals with pacemakers should consult physician due to electromagnetic fields.
Avoid wet locations/rain, keep children away, use correct appliance.
Use identical parts, don't force, disconnect when not in use, check for damage.
Consult doctor, avoid if pregnant/poor circulation; stop if symptoms appear.
Don't smoke, wear gloves, use low-vibration models, take breaks, grip lightly.
Hold with both hands, keep body away from chain, use insulated grips, maintain footing.
Stay alert, avoid tired operation, keep 50ft from lines/bystanders, avoid tree operation.
Follow lubrication/tensioning instructions; keep handles clean; use for wood only.
Prevent kickback via grip, parts, sharpening; avoid touching guide bar tip.
Details electrical rating, guide bar, and saw chain specifications.
Read all safety information before setup or use.
Identifies key parts of the pole saw through an illustration.
Detailed steps for fitting the guide bar and saw chain onto the pole saw.
Guidelines for checking chain tension before, during, and periodically after use.
Step-by-step guide on how to adjust the saw chain tension.
Instructions for filling the automatic oiler reservoir before use.
Procedure for adjusting the pole saw's length and ensuring it is secure.
Guidelines for preparing the work area and workpiece for safe cutting.
Instructions on how to properly secure the extension cord to prevent hazards.
Essential checks before each use, including oil, chain tension, and sharpness.
Steps for starting the saw, holding it, and making cuts safely.
Guidance on how to cut branches effectively and safely.
Step-by-step method for making cuts on long branches.
Method for making multiple cuts to sever thick branches.
Procedures for cleaning, maintaining, and lubricating the pole saw.
Indicators for when the saw chain needs sharpening or replacement.
Guidance on when and how to replace the drive sprocket.
How to check for wear on the guide bar rails.
A comprehensive list of all parts included with the pole saw.
An illustrated breakdown showing the assembly of all pole saw components.
Details the terms, conditions, and exclusions of the product warranty.
Loading...