To Next PageTo Next Page
Need help?Do you have a question about the Posh Domaine and is the answer not in the manual?
General| Brand | Posh |
|---|---|
| Model | Domaine |
| Category | Indoor Furnishing |
| Language | English |
Inspect for freight damage or incorrect items within 48 hours of receipt. Claims require pre-installation checks.
Ensure 300mm clearance from wet areas and adequate bathroom ventilation to prevent moisture damage.
Wall-hung units require fixing to support beams or noggins for solid wall backing.
Ensure walls are plumb and floors are level to prevent operational issues and material stress.
Verify plumbing positions and clearances behind drawers, considering water supply fittings.
Tiles should extend behind and beneath furniture to prevent moisture and mould build-up.
Seal all edges where the cabinet meets the wall and floor with neutral cure silicone.
Mark the vanity position considering top/basin thickness and ensure attachment to two support beams.
Remove doors/drawers, measure plumbing locations, and drill holes for plumbing and wall fastening.
Position the vanity, check for levelness, and pack if necessary to ensure it sits level and square.
Apply silicone to edges and position the top/basin, ensuring overhang and level surface.
Apply non-acidic silicone to edges where the vanity top meets the wall and floor.
Fasten the cabinet securely to the wall through the back using appropriate screws/bolts.
Install drawers and doors, then adjust them to align correctly.
Clean building residue from the cabinet and ensure drawer runners are free of debris.
Instructions for assembling and attaching the detachable kickboard.
Join side panels with the rear panel using screws and cam-locks.
Attach and fasten the front panel to each side panel, ensuring cam-locks are fastened.
For larger units, insert and secure the centre support panel with cams.
Fasten the kickboard to the vanity unit using cam-locks at the base.
Detailed instructions for adjusting and installing pressed metal drawers.
Adjust drawer front height by turning the back screw, then tighten the front screw.
Adjust drawer front alignment left or right by turning screws and tighten all screws.
Guide on how to remove and insert drawers from the cabinet runners.
Steps to remove and install the drawer front by loosening/tightening screws.
Procedure to reset the soft-close adapter trigger if it is not working.
Instructions for removing, inserting, and adjusting premium solid sided drawers.
Steps to remove drawers by lifting the front and insert by aligning runners.
Adjust drawer front height by turning the back screw, then tighten screws.
Adjust drawer front position left/right by turning corresponding screws.
Adjust drawer front tilt by turning screws located at the front and back.
Guide to remove drawer fronts by unscrewing and reinstalling them.
Instructions for side, depth, and height adjustment of door hinges.
Use front screw to move the door left/right or to level it.
Use back screw to move the door inward or outward from the carcass.
Loosen mount plate screws to adjust door height, then retighten.
Steps for removing doors, installing hinges onto carcass, and replacing hinges on doors.
Procedure to remove doors by releasing clips and install by pressing hinges into place.
How to remove hinges from the door by releasing the top cover plate.
Guide to place hinges into door holes and secure by clicking the cover plate down.
Instructions for installing the universal plug and waste components.
Steps for installing waste, including washers, seals, and securing the plug.
General advice on maintaining products, emphasizing ventilation and avoiding excessive moisture.
Cleaning instructions for cabinets, including removing scratches and noting water resistance.
Maintenance for acrylic tops, focusing on gentle cleaning and scratch removal.
Care for ceramic tops, noting scratch limitations and potential visual distortions.
Cleaning and care for specific benchtops, including stain removal and heat protection.
Instructions for cleaning bamboo surfaces, emphasizing immediate spill cleanup.
