16
ASSEMBLY
Assembling the Chair, continued...
• To prevent disconnection, be sure to double check all connections by gently pulling on the electrical
connector and air hose.
• If not connected properly, the air cells will not inflate as designed.
CAUTION
STEP 1
Unbox chair and place in designated area.
STEP 2
Standing in front of the chair base, locate the
seat heat connector found on the right side.
Ensure the connector/cord is resting on the
seat rather than hanging on the side.
STEP 3
Unbox the arms and attach by aligning them to
the base of the chair. Once aligned, firmly push
arm toward chair base to lock into place.
To Next Page
Loading...
