18
ASSEMBLY
Assembling the Chair, continued...
STEP 9
Connect top and bottom zippers of hip air
bladders on left and right sides.
STEP 10
Plug the power cord into the back base of
the chair.
STEP 12
Before use, insert the remote control into the
pocket and manage the remote control cord as
shown below. It can be attached to either the left
or right side.
STEP 13
Turn on the main power.
STEP 11
Screw the remote control connector into the
back base of the chair.
bladders on left and right sides.
Plug the power cord into the back base of
Remote
control port
ON
OFF
STEP 14
Using the remote control, power on the chair,
then use the Back Up button to bring the chair
to its upright position. Again, using the remote
control, power off the chair.
To Next Page
Loading...
